Rope Machines

Ropemaking Tools

Machine Parts


New Era Rope Machine Handle Assembly

New Era Rope Machine Handle Assembly - Replacement arm and wooden handle ready for installation to your New Era machine. May also fit some Wonder Rope Machines. Handle is turned Ash, matching the original design, and treated with a single coat of Danish Oil Finish. The handle arm is now cast in metal filled epoxy versus the original iron. Paintable to match your machine.

Handle is mounted to arm with a four inch steel rivet epoxied to the arm. A quarter-20 flat head screw and square nut is provided to attach the assembly to the machine's ring gear. Disassembly of the rope machine housing is usually required to install the handle assembly. The machine screw head may need to be filed to fit the socket in the ring gear plate. Screw head must be flush or below plate surface to not interfere with operation. Use thread locking compound (or even nail polish!) to lock threads when re-assembling. Part number P7.

See Parts Ordering Page for ordering information.